Rep 5.2 Toner Sensor - Xerox DocuPrint N2125 Service Manual

Figure 4 Paper Handler Assembly Removal
Replacement
1. Reinstall the components in the reverse order.
Repair-Adjustment
REP 5.1, REP 5.2

REP 5.2 Toner Sensor

Parts List on PL 5.1
Removal
Switch off the power and disconnect the Power Cord.
1. Remove Tray 1.
2. Remove the Left Interface Cover Assembly
3. Remove the Front Cover Assembly
4. Remove the Left Front Cover
5. Remove the MBF Chute Assembly
6. Remove the Paper Handler Assembly
7. Release the front locking tab and remove the Sensor
8. Disconnect P/J421 from the Toner Sensor
02/2000
4-38
WARNING
(REP 1.1).
(REP 1.6).
(REP 1.7).
(REP 4.1).
(REP 5.1).
(Figure 1).
(Figure 1).
Figure 1 Toner Sensor Kit
Initial Issue
DocuPrint N2125