Rep 5.3 Registration Actuator - Xerox DocuPrint N2125 Service Manual

Replacement
1. Reinstall the components in the reverse order.
Initial Issue
DocuPrint N2125

REP 5.3 Registration Actuator

Parts List on PL 5.1
Removal
Switch off the power and disconnect the Power Cord.
1. Remove Tray 1.
2. Remove the Left Interface Cover Assembly
3. Remove the Front Cover Assembly
4. Remove the Left Front Cover
5. Remove the MBF Chute Assembly
6. Remove the Paper Handler Assembly
7. Open the Upper Chute (Figure
8. Disconnect the right hook of the Registration Sensor Spring
9. Move the Actuator to the left until the right end is free
10. Remove the Actuator.
Figure 1 Registration Actuator
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-39
WARNING
(REP 1.1).
(REP 1.6).
(REP 1.7).
(REP 4.1).
(REP 5.1).
1).
(Figure 1).
(Figure 1).
Repair-Adjustment
REP 5.2, REP 5.3