Viewing Call Routing Status - AudioCodes Mediant 3000 User Manual

•
Group Name: name of the served group, if applicable
•
Status: indicates whether or not the group is registered ("Registered" or
"Unregistered")
Note:
47.8

Viewing Call Routing Status

The Call Routing Status page provides you with information on the current routing method
used by the device. This information includes the IP address and FQDN (if used) of the
Proxy server with which the device currently operates.

To view call routing status:

Open the Call Routing Status page (Status & Diagnostics tab > VoIP Status menu >
Call Routing Status).
Parameter
Call-Routing Method
IP Address
State
User's Manual
The registration mode (i.e., per device, endpoint, account. or no registration)
is configured in the Trunk Group Settings table (see 'Configuring Trunk Group
Settings' on page 327) or using the TrunkGroupSettings ini file parameter.
Figure 47-8: Call Routing Status Page
Call Routing Status Parameters

Proxy/GK = Proxy server is used to route calls.

Routing Table = The teltoiprouteM3K> is used to route calls.

Not Used = Proxy server isn't defined.

IP address and FQDN (if exists) of the Proxy server with which the
device currently operates.

N/A = Proxy server isn't defined.

OK = Communication with the Proxy server is in order.

Fail = No response from any of the defined Proxies.
Description
586
Mediant 3000
Document #: LTRT-89729