Fast Track Guide
Note:
3.5
Configuring the Trunk Settings
To configure the trunk settings, take these 13 steps:
Access the Embedded Web Server (refer to Section
1.
Open the 'Trunk Settings' screen ( Advanced Configuration menu > Trunk Settings ); the
2.
'Trunk Settings' screen is displayed.
Initially, the screen appears with the parameters fields grayed (indicating read-only). The
Stop Trunk button appears at the bottom of the screen.
The Trunk Status indicators appear colored.
their descriptions.
Version 4.8
The following Sections from here, up to the end of this Guide,
apply equally to MGCP, MEGACO, H.323 and SIP.
Figure 3-6: Trunk Settings Screen
Table 3-2: Trunks Status Color Indicator Keys
Indicator
Color
Gray
Green
Yellow
Red
Blue
Orange
3.3
on page 15).
Table 3-2
shows the possible indicators and
Description
Disabled
Active-OK
RAI Alarm
LOS/LOF Alarm
AIS Alarm
D-channel Alarm (ISDN only)
23
3. Configuring the Mediant 1000
February 2006