Enable Ospf - D-Link xstack DGS-3620 series Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28PC:admin#show ospf virtual_link
Command: show ospf virtual_link
Virtual Interface Configuration
Transit Virtual
Area ID Neighbor Router Interval Interval
--------------- --------------- -------- -------- -------------- ------
4.4.4.4 1.1.1.1
4.4.4.4 6.6.6.6
Total Entries : 2
DGS-3620-28PC:admin#

78-19 enable ospf

Description
This command is used to enable OSPF on the switch.
Format
enable ospf
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable OSPF on the switch:
DGS-3620-28PC:admin# enable ospf
Command: enable ospf
Success.
DGS-3620-28PC:admin#
78-20 show ospf
Description
This command is used to display the current OSPF settings on the switch.
Hello Dead Authentication Link
10 60 MD5
10 250 Simple
910
Status
Up
Down