Sas Routing In Emergency State; Sas Configuration - AudioCodes Mediant 3000 User Manual

SIP User's Manual

20.1.2.2 SAS Routing in Emergency State

The flowchart below shows the routing logic for SAS in emergency state:
20.2

SAS Configuration

SAS supports various configuration possibilities, depending on how the device is deployed
in the network and the network architecture requirements. This section provides step-by-
step procedures on configuring the SAS application, using the device's Web interface.
The SAS configuration includes the following:

General SAS configuration that is common to all SAS deployment types (see 'General
SAS Configuration' on page 450)

SAS outbound mode (see 'Configuring SAS Outbound Mode' on page 453)

SAS redundant mode (see 'Configuring SAS Redundant Mode' on page 453)

Gateway and SAS applications deployed together (see 'Configuring Gateway
Application with SAS' on page 454)

Optional, advanced SAS features (see 'Advanced SAS Configuration' on page 458)
Version 6.4
Figure 20-7: Flowchart for SAS Emergency State
20. Stand-Alone Survivability (SAS) Application
449 November 2011