Output Setting - Using Perfect Binder Pb-503; Output Setting - Taking Out Printed Sheets From The Tray Of Finisher Fs-532 - Konica Minolta bizhub Press 1250P Additional Information

1.9

Output Setting - Taking Out Printed Sheets From the Tray of Finisher FS-532

1.9 Output Setting - Taking Out Printed Sheets From the Tray of Fin-
isher FS-532
The primary (main) tray, secondary (sub) tray, and folder tray of Finisher FS-532 have a limit in capacity.
When the limit set up for each tray is exceeded, the machine detects that the tray is filled up and automatically
stops printing.
d
Reference
The loading capacity of Finisher FS-532 primary (main) tray is determined according to output paper sizes
and options used in printing; however, the machine can be set to stop printing only when the lower limit sen-
sor of the primary (main) tray detects the full load. Contact your service representative, if desired.
For the subsequent procedure, see "8.5.1 Taking Out Printed Sheets From the Primary (Main) Tray Suspend-
ed Automatically" of [User's Guide - Copier].
1.10

Output Setting - Using Perfect Binder PB-503

This section selectively describes the changed contents of specifications in perfect binding.
-
Paper tray
– Body: main body tray (Tray 1, Tray 2), Paper Feeder Unit PF-703 (Trays 3 to 11), Paper Feeder Unit
PF-706 (Trays 3 to 8)
– Cover: main body tray (Tray 1, Tray 2), Paper Feeder Unit PF-703 (Trays 3 to 11), Paper Feeder Unit
PF-706 (Trays 3 to 8), Perfect Binder PB-503 cover tray (cover print unavailable), the upper/lower tray
of the post inserter of Folding Unit FD-503 (cover print unavailable), Large Capacity Post Inserter PI-
PFU (cover print unavailable)
-
Cover print
– When feeding cover from a main body tray (Tray 1, Tray 2), Paper Feeder Unit PF-703 (Trays 3 to 11),
or Paper Feeder Unit PF-706 (Trays 3 to 8), both simplex print and duplex print are enabled. Covers
fed from Perfect Binder PB-503 cover tray, the upper/lower tray of the post inserter of Folding Unit
FD-503, or Large Capacity Post Inserter PI-PFU cannot be printed.
If a set of A4 v or 8.5 e 11 v body size is bound using a cover fed from the main body tray (Tray 1, Tray 2),
Paper Feeder Unit PF-703 (Trays 3 to 11), or Paper Feeder Unit PF-706 (Trays 3 to 8), the maximum thick-
ness of the book will be less than 30 mm.
- Cover Trim OFF: 460 - (216 e 2) = 28 mm
- Cover Trim ON: 460 - (216 e 2) - (5 mm in trimming width) = 23 mm
bizhub PRESS 1250/1052, bizhub PRESS 1250P, bizhub PRO 951 Additional Information
1
1-21