Copy Limit Reached Effect - Konica Minolta 7135 User Manual

[5] Copy Limit Reached Effect

Use this function to select whether the copier will stop when the count limit is reached,
or if the copier will complete the copy job before stopping when reaching maximum
copy count.
❒ Setting options: Immediately, After job, Warning
❒ Default setting: After job
ECM Setting Menu Screen
Procedure
1 Touch 5. Copy Limit Reached effect on the ECM Setting Menu Screen to display the
Copy Limit Reached Effect Screen.
2 Select setting option:
Touch Immediately to stop the copier when the copy limit is reached.
In this case, the paper in process will be completed, and the message "Enter ECM
password" will display after the copier stops.
Touch After job to stop the copier after the current job is completed.
Touch Warning only to display a warning message when copy limit is reached.
3 Touch OK to complete the settings and return to the ECM Setting Menu Screen. If
other ECM setting changes are required, touch the desired key.
4 Touch RETURN to restore the Key Operator Mode Screen. If other key operator
settings are required, touch the desired key.
5 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
11-26
[4] E.C.M. (Electronic Copy Monitor) (continued)
Copy Limit Reached Effect Screen