Installing The Realpresence Collaboration Server 800S; Unpacking The Realpresence Collaboration Server 800S - Polycom RealPresence 800s Getting Started Manual

RealPresence Collaboration Server 800s/Virtual Edition Getting Started Guide
RealPresence Collaboration Server (RMX) 800s Network Equipment and Address Information
Parameter
Control Unit IP Address
Control Unit Subnet Mask
Default Router IP Address
Signaling Host IP address
Media Card 1 IP Address
Gatekeeper IP address (optional)
DNS IP address (optional)
SIP Server IP address (optional)

Installing the RealPresence Collaboration Server 800s

The installation of the RealPresence Collaboration Server 800s consists of the following procedures:
● Unpacking the RealPresence Collaboration Server 800s
● Hardware Installation and Rack Mounting
● Connecting the Cables to the MCU
● Modifying the Factory Default Management Network Settings on the USB Memory Stick

Unpacking the RealPresence Collaboration Server 800s

The RealPresence Collaboration Server 800s system uses a Polycom-branded Dell server.
To unpack and install the hardware:
1 Examine the shipping container for damage. If you find damage, file a claim with the delivery carrier.
Polycom® is not responsible for damage sustained during shipment of this product.
2 Open and review the container packing slips.
3 Open the container and examine the contents. The system server package includes these items:
 The Polycom RealPresence Collaboration Server 800s system.
 The Polycom® RealPresence Collaboration Server 800s Quick Start Guide
 The server Product Information Guide.
 Power cord
 Two LAN cables
 Rack-mount kit
Polycom®, Inc.
Factory Default
192.168.1.254
255.255.255.0
192.168.1.1
Same as the Media and defined by the
Media IP address
Same as the Signaling Host IP address
–
–
–
Local Network Settings
24