Installing The Realpresence Collaboration Server (Rmx) 2000; Unpacking The Realpresence Collaboration Server (Rmx) 2000 - Polycom 2000 Hardware Manual

RealPresence®Collaboration Server (RMX) 2000 Hardware Guide
● In a single rack installation, stabilizers should be attached to the rack.
● In multiple rack installations, the racks should be coupled together.
● Always make sure the rack is stable before extending a component from the rack.
● You should extend only one component at a time - extending two or more
● simultaneously may cause the rack to become unstable.
● Before you install the rails, determine the placement of each component in the rack.
● Install the heaviest components on the bottom of the rack first, and then work up.
● Allow the power supply units to cool before touching them.
● Always keep the rack's trays and card's slots closed when not servicing, to maintain proper cooling.

Installing the RealPresence Collaboration Server (RMX) 2000

The following procedures have to be performed to install the RMX 2000 in your site:
● Unpacking the RMX
● Installing the RTM ISDN card on the RMX
● Installing the RMX in a rack or as a standalone
● Connecting the RMX 2000 to the power source
● Connecting the network (LAN and ISDN) cables to the RMX

Unpacking the RealPresence Collaboration Server (RMX) 2000

Observe the following procedures when unpacking the RMX 2000.
To unpack and lift the RMX 2000:
1 When you receive the RMX 2000 packing case, inspect the equipment for damage and verify that
the components match the packing slip.
2 Open the top cover of the packing case.
Boxes are placed on the top Stratocell® and contain the following:
 Installation Accessories: This kit contains the power cables, 1 ethernet cable, USB key and
documentation.
 Rack Installation Accessories: This kit contains the accessories for the 19" rack.
 Optional - ISDN Package: Contains the ISDN card and ISDN Software License.
.
Write down the RMX's serial number on the sticker at the back of the unit. You will need it for product
registration later in the process.
Make sure that boxes contain all the required parts.
Polycom, Inc. 20