Restarting The Mcu - Polycom RealPresence 800s Getting Started Manual

RealPresence Collaboration Server 800s/Virtual Edition Getting Started Guide
Default System Flag Settings
Field
Conference ID Length
(MCU)
Minimum Conference ID
Length (User)
Maximum Conference ID
Length (User)
MCU Display Name
Terminate Conference
when Chairperson Exits
Auto Extend Conferences
These values can be modified via the Setup > System Configuration. For more information, see the
Polycom® RealPresence Collaboration Server 800s/Virtual Edition Administrator's Guide.

Restarting the MCU

In some instances, you may be required to restart the MCU. The following procedure describes how to
restart the MCU instance.
To restart the MCU instance:
1 Click Start > Programs.
a If the VMware vSphere Client is displayed in the recently used programs list, click VMware
vSphere Client in the list to start the application.
or
Polycom®, Inc.
Description / Default
The number of digits of the Conference ID to be
assigned by the MCU.
Range: 2-16 (Default: 5)
The minimum number of digits that the user must
enter when manually assigning a numeric ID to a
conference.
Range: 2-16 (Default: 4)
The maximum number of digits that the user can
enter when manually assigning a Numeric ID to a
conference.
Range: 2-16 (Default: 8)
The MCU name is displayed on the endpoint's screen.
Default name: (Blank)
When Yes is selected (default), the conference ends when the chairperson exits
even if there are other participants connected.
When No is selected, the conference automatically ends at the predefined end time,
or when all the participants have disconnected from the conference.
When Yes is selected (default), allows conferences running on the Collaboration
Server to be automatically extended as long as there are participants connected and
there are available resources.
The maximum extension time allowed by the MCU is 30 minutes.
Note: Selecting 2 digits limits
the number of simultaneous
ongoing conferences to 99.
100