Pcm Main Menu - Level 1; Click & View; Invite Participant - Polycom RealPresence 800s Getting Started Manual

RealPresence Collaboration Server 800s/Virtual Edition Getting Started Guide
PCM - DTMF Codes
Numeric Key Description
• Number input.
0
• Shortcut key to a numbered menu option - when conference video or the PCM menu is
displayed.
• Number input.
• Shortcut key to a numbered menu option - when the conference video or the PCM menu is
1-9
displayed.
• Initiate PCM session on ISDN/PSTN endpoint (1 is the default for the Start PCM DTMF Code).
• Initiate DTMF mode (with Polycom endpoints) - during a conference or when the PCM menu is
displayed.
*
• Enter a period "." - while entering an IP address.
# Confirm selection and send information to the RMX.

PCM Main Menu - Level 1

Click & View
With the Click&View application, participants can change their Personal Layouts using the Arrow Keys or
DTMF codes entered using the Numeric Keys of their endpoints.
For a full description of Click&View see

Invite Participant

To invite a participant to connect to the conference:
1 Use the Up/Down arrow keys to select Invite Participant in the Main Menu and then press the
Right arrow or # key to confirm your selection.
or
Press the 2 key on the Remote Device.
The Invite Participant sub menu is displayed.
2 Use the Numeric Keys to enter the number of the participant's endpoint.
Polycom®, Inc.
Defining a New Conference IVR Service.
205