Entry Queue Access; Participants (Avc Participants) - Polycom RealPresence 800s Getting Started Manual

RealPresence Collaboration Server 800s/Virtual Edition Getting Started Guide

Entry Queue Access

In the RealPresence CloudAxis Solution,Participants dial in to VEQs (Virtual Entry Queues) defined
on the RealPresence Virtualization Manager (DMA) component. This procedure describes direct dial
in to the Entry Queues defined on the MCU component.
Access via an Entry Queue allows all participants to dial the same entry point that acts as a routing lobby.
Once in the Entry Queue, participants are guided to the conference according to the conference ID they
enter.
Move between the Entry Queue and the destination conference is enabled when both conferencing entities
have the same conferencing parameters (it is recommended that the same Profile is used for both entities).
For example, participants connected to a mixed CP and SVC conference can only be moved to a mixed CP
and SVC conference.
Dial-in Connection via IVR System
H.323 Participants (AVC Participants)
Dialing is executed in the same way as for conferences, where the Entry Queue ID/Name replaces the
Conference ID/Name.
» H.323 participants dial
Example:
Prefix in gatekeeper: 925
Entry Queue ID: 1000
Polycom®, Inc.
[Gatekeeper Prefix][Entry Queue ID/Name]
.
156