Video Forcing - Polycom RealPresence 800s Getting Started Manual

RealPresence Collaboration Server 800s/Virtual Edition Getting Started Guide
Following a 10 second delay, the FECC active icon (
selected site.
If no camera control keys are pressed on the Remote Control Device within a period of 5 seconds,
the previous menu (Camera Control) menu is automatically displayed.
4 Use the Up/Down/Left/Right/Zoom In/Zoom Out arrow keys to control the remote camera.
5 Use the Zoom Out key on the remote control to return to the PCM Main Menu.

Video Forcing

This function is not available to chairpersons using PCM with ISDN endpoints.
Video Forcing enables the chairperson to force the video of a specific participant to a specific window of the
video layout.
To Video Force a participant's video:
1 Use the Up/Down arrow keys to select Video Force in the Main Menu and then press the Right
arrow or # key to confirm your selection.
or
Press the 5 key on the Remote Device.
The Video Force sub menu is displayed.
2 Use the Up/Down/Left/Right arrow keys to select the window of the video layout that you want the
specific participant to be displayed in.
3 Press the Zoom In key to cycle the display of all participants in the selected video window until the
participant you want to be displayed appears.
4 Press the Right arrow or # key to confirm your selection.
Polycom®, Inc.
) is displayed in the video image of the
209