Polycom RealPresence 800s Getting Started Manual page 46

RealPresence Collaboration Server 800s/Virtual Edition Getting Started Guide
Fast Configuration Wizard – SIP Server
Field
SIP Server
SIP Server IP Address or
Name
Server Domain Name
Transport Type
12 Click Next.
13 Enter the required Security information in the dialog box.
Polycom®, Inc.
Description
Select:
• Specify – to manually configure SIP servers.
• Off – if SIP servers are not present in the network.
Enter either the IP address of the preferred SIP server or its host name (if a DNS
server is used).
Enter the name of the SIP domain.
Select the transport type and protocol that is used for signaling between the MCU
and the SIP Server or the endpoints according to the protocol supported by the SIP
Server:
• UDP – Select this option to use UDP for signaling.
• TCP – Select this option to use TCP for signaling.
• TLS – The Signaling Host listens on secured port 5061 only and all outgoing
connections are established on secured connections. Calls from SIP clients or
servers to non secured ports are rejected.
The following protocols are supported:
• TLS 1.0
• SSL 2.0
• SSL 3.0.
38