Table of Contents
Advertisement
Rack Mount Safety Precautions
The following precautions should be followed when installing the RMX 4000 on a rack:
•
•
•
•
•
•
•
•
•
Installing the RealPresence Collaboration Server
(RMX) 4000
The following procedures have to be performed to install the RMX 4000 in your site:
•
•
•
•
•
Unpacking the RealPresence Collaboration Server (RMX) 4000
To unpack and lift the RMX 4000:
1
2
3
Write down the RMX's serial number that is on a sticker on the back of the unit. It will be needed for
product registration later in the process.
Polycom, Inc.
The RMX 4000 has a height of 6U. Ensure this space is available on the rack.
Ensure that the leveling jacks on the bottom of the rack are fully extended to the floor
with the full weight of the rack resting on them.
In a single rack installation, stabilizers should be attached to the rack.
In multiple rack installations, the racks should be coupled together.
Always make sure the rack is stable before extending a component from the rack.
You should extend only one component at a time - extending two or more
simultaneously may cause the rack to become unstable.
Before you install the rails, determine the placement of each component in the rack.
Install the heaviest components on the bottom of the rack first, and then work up.
Always keep the rack's trays and card's slots closed when not servicing, to maintain
proper cooling.
Unpacking the RMX
Installing the RTM ISDN card on the RMX
Installing the RMX in a rack or as a standalone
Connecting the RMX to the power source
Connecting the network (LAN, IP and ISDN) cables to the RMX
When you receive the RMX 4000 packing case, inspect the equipment for damage and
verify that the components match the packing slip.
The RMX 4000 is shipped in a packing case with Stratocell® packaging, and the top
cover must be unlocked and lifted where the RMX is placed on the inside of an anti-
static plastic bag.
Open the top cover of the packing case.
Boxes are placed on the top Stratocell® and contain the following:
— Installation Accessories. This kit contains the power cables, 4 ethernet cables, USB
key and documentation.
— Rack Installation Accessories. This kit contains the accessories for the 19" rack.
— Optional - ISDN Package. Contains the ISDN card and ISDN Software License.
Chapter 1-Hardware Description
1-7
Advertisement
Table of Contents
