Polycom RealPresence 800s Getting Started Manual page 45

RealPresence Collaboration Server 800s/Virtual Edition Getting Started Guide
Fast Configuration Wizard – Gatekeeper
Field
Gatekeeper
Primary Gatekeeper
IP Address or Name
MCU Prefix in Gatekeeper
Aliases
Alias
Type
9 Click Next.
10 If you selected H.323, click Next and go to Step 12.
11 Enter the required SIP Server information in the dialog box.
Polycom®, Inc.
Description
Select Specify to enable configuration of the gatekeeper IP address.
When Off is selected, all gatekeeper options are disabled.
Enter either the gatekeeper's host name (if a DNS Server is used) or IP address.
Enter the string with which the MCU registers itself with the gatekeeper.
The gatekeeper uses this string to identify the MCU when forwarding calls to it.
H.323 endpoints use this number as the first part of their dial-in string when dialing
the MCU.
The alias that identifies the Collaboration Server's Signaling Host within the network.
Up to five aliases can be defined for each Collaboration Server.
Note: When a gatekeeper is specified, at least one alias must be entered in the table.
Additional aliases or prefixes may also be entered.
The type defines the format in which the card's alias is sent to the gatekeeper. Each
alias can be of a different type:
• H.323 ID (alphanumeric ID)
• E.164 (digits 0-9, * and #)
• Email ID (email address format,
e.g. abc@example.com)
• Participant Number (digits 0-9, * and #)
Note: Although all types are supported, the type of alias to be used depends on the
gatekeeper's capabilities.
37