Installing The Realpresence Collaboration Server (Rmx) 4000; Unpacking The Realpresence Collaboration Server (Rmx) 4000; (Rmx) 4000 - Polycom 4000 Hardware Manual

RealPresence®Collaboration Server 4000 Hardware Guide
● Ensure that the leveling jacks on the bottom of the rack are fully extended to the floor with the full
weight of the rack resting on them.
● In a single rack installation, stabilizers should be attached to the rack.
● In multiple rack installations, the racks should be coupled together.
● Always make sure the rack is stable before extending a component from the rack.
● You should extend only one component at a time - extending two or more simultaneously may cause
the rack to become unstable.
● Before you install the rails, determine the placement of each component in the rack.
● Install the heaviest components on the bottom of the rack first, and then work up.
● Always keep the rack's trays and card's slots closed when not servicing, to maintain proper cooling.
Installing the RealPresence Collaboration Server

(RMX) 4000

The following procedures have to be performed to install the RMX 4000 in your site:
● Unpacking the RMX
● Installing the RTM ISDN card on the RMX
● Installing the RMX in a rack or as a standalone
● Connecting the RMX to the power source
● Connecting the network (LAN, IP and ISDN) cables to the RMX

Unpacking the RealPresence Collaboration Server (RMX) 4000

Carefully remove the RMX 4000 from its packing case can check the contents.
To unpack and lift the RMX 4000:
1 When you receive the RMX 4000 packing case, inspect the equipment for damage and verify that
the components match the packing slip.
2 The RMX 4000 is shipped in a packing case with Stratocell® packaging, and the top cover must be
unlocked and lifted where the RMX is placed on the inside of an anti-static plastic bag.
3 Open the top cover of the packing case.
Boxes are placed on the top Stratocell® and contain the following:
 Installation Accessories. This kit contains the power cables, 4 ethernet cables, USB key and
documentation.
 Rack Installation Accessories. This kit contains the accessories for the 19" rack.
 Optional - ISDN Package. Contains the ISDN card and ISDN Software License.
Polycom, Inc. 21