Manual Ip Configuration - Polycom RealPresence 800s Getting Started Manual

RealPresence Collaboration Server 800s/Virtual Edition Getting Started Guide
To obtain the IP address of the Virtual Machine:
» Click on the Summary tab.
If the IP Address field is blank after the Virtual Machine has fully started, the most likely reason is that
DHCP is not supported in your environment. In order to use the MCU, the networking information will
need to be configured manually. For more information,
in your environment and no IP Address is assigned, consult your network administrator.
If the IP Address field is filled in, proceed to

Manual IP Configuration

When a DHCP is enabled for the vSphere server network, the MCU is automatically assigned an IP address.
If an IP address is not automatically assigned, you must manually configure the network settings in order to
use the MCU.
The settings here are reflected in the Management Network and Default IP Network in the IP Network
Services. For more information, see the Polycom® RealPresence Collaboration Server 800s/Virtual Edition
Administrator's Guide,
Edition.
This procedure can be run anytime the MCU is running. However, ongoing calls will be disconnected if
this procedure is run while conferences are taking place.
Polycom®, Inc.
Viewing the Management Network in the RealPresence Collaboration Server Virtual
Manual IP Configuration. If DHCP is supported
Product Registration.
68