Far End Camera Control - Polycom RealPresence 800s Getting Started Manual

RealPresence Collaboration Server 800s/Virtual Edition Getting Started Guide
Participants Mute/Status - Icons
Status
Icon Description
The audio output to this endpoint is blocked. This endpoint cannot receive the conference
audio.
Video output from the endpoint is allowed. Other conference participants can see video from
this endpoint.
Video output from the endpoint is suspended. Other conference participants cannot see video
from this endpoint.
The endpoint is neither muted nor blocked.
The endpoint is both muted and blocked.

Far End Camera Control

This function is not available to chairpersons using PCM with ISDN endpoints.
The endpoint to be controlled must support Far End Camera Control (FECC).
Using the arrow keys of the remote control device, the chairperson can control the direction, zoom and focus
of a remote endpoint's camera.
To control a far camera:
1 Use the Up/Down arrow keys to select Camera Control in the Main Menu and then press the Right
arrow or # key to confirm your selection.
or
Press the 4 key on the Remote Device.
The Camera Control sub menu is displayed.
2 Use the Up/Down/Left/Right arrow keys to select the far camera to be controlled.
A colored frame is displayed around the selected cell in the video layout.
3 Use the Zoom In key to activate FECC.
Polycom®, Inc. 208