Installing The Realpresence Collaboration Server (Rmx) 1500; Server (Rmx) 1500 - Polycom 1500 Getting Started Manual

RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Getting Started Guide
Detail of Left Rail Runner (front internal view)
The number of screws to install depends on the rack width.
6 Repeat step 5 for the right rack rail runner.

Installing the RealPresence Collaboration Server (RMX) 1500

For detailed instructions, precautions and requirements for installing the RealPresence
Collaboration Server (RMX) 1500 refer to the Polycom RealPresence Collaboration Server
(RMX) 1500 Hardware Guide.
The following procedures have to be performed to install the RealPresence Collaboration Server
(RMX) 1500 in your site:
● Optional. Installing the RTM ISDN card on the Collaboration Server (Optional)
● Installing the Collaboration Server in a rack or as a standalone
● Connecting the Collaboration Server to the power source
● Connecting the network (LAN, IP and ISDN) cables to the Collaboration Server.
Optional. Installing the RTM ISDN 1500 Card on the RealPresence Collaboration

Server (RMX) 1500

If the ISDN option was purchased with your Collaboration Server, the ISDN card is shipped separately and
must be manually installed into the rear of the RealPresence Collaboration Server (RMX) 1500. It is
recommended to install the ISDN card before the RealPresence Collaboration Server (RMX) 1500 is placed
in a rack.
Polycom®, Inc. 38