Installing The Realpresence Collaboration Server 800S; Unpacking The Realpresence Collaboration Server 800S - Polycom RealPresence Getting Started Manual

Table 2-1
Parameter
Control Unit IP Address
Control Unit Subnet Mask
Default Router IP Address
Signaling Host IP address
Media Card 1 IP Address
Gatekeeper IP address (optional)
DNS IP address (optional)
SIP Server IP address (optional)

Installing the RealPresence Collaboration Server 800s

The installation of the RealPresence Collaboration Server 800s consists of the following
procedures:
•
•
•
•

Unpacking the RealPresence Collaboration Server 800s

The RealPresence Collaboration Server 800s system uses a Polycom-branded Dell server.
To unpack and install the hardware:
1
2
3
Polycom, Inc.
Network Equipment and Address Information
Unpacking the RealPresence Collaboration Server 800s
Hardware Installation and Rack Mounting
Connecting the Cables to the MCU
Modifying the Factory Default Management Network Settings on the USB Memory
Stick
Examine the shipping container for damage. If you find damage, file a claim with the
delivery carrier. Polycom® is not responsible for damage sustained during shipment of
this product.
Open and review the container packing slips.
Open the container and examine the contents. The system server package includes
these items:
— The Polycom RealPresence Collaboration Server 800s system.
— The Polycom® RealPresence Collaboration Server 800s Virtual Edition Quick Start Guide
— The server Product Information Guide.
— Power cord
Factory Default
192.168.1.254
255.255.255.0
192.168.1.1
Same as the Media and defined
by the Media IP address
Same as the Signaling Host
IP address
–
–
–
Chapter 2-First Time Installation and Configuration
Local Network Settings
2-3