Installation Precautions; Installing The Realpresence Collaboration Server (Rmx) 1500; Unpacking The Realpresence Collaboration Server (Rmx) 1500 - Polycom RMX 1500 Hardware Manual

Polycom RealPresence Collaboration Server (RMX) 1500 Hardware Guide

Installation Precautions

When handling electronic components, standard anti-static precautions must be observed:
•
•
•
The following precautions should be followed with regards to installation of the RMX 1500:
•
•
•
Sealed System! The RMX 1500 is a sealed system, breaking the seal and opening the RMX
chassis VOIDS the WARRANTY!

Installing the RealPresence Collaboration Server (RMX) 1500

The following procedures have to be performed to install the RMX 1500 in your site:
•
•
•
•
•

Unpacking the RealPresence Collaboration Server (RMX) 1500

To unpack and lift the RMX 1500:
1
2
Write down the RMX's serial number that is on a sticker on the back of the unit. It will be needed for
product registration later in the process.
Make sure that boxes contain all the required parts.
1-6
Wear a grounding strap
Handle cards by their edges only and do not touch their components or connector pins
Keep components in anti-static bags, when not installed in the RMX 1500.
Use a regulating uninterruptable power supply (UPS) to protect the RMX 1500 from
power surges and voltage spikes, to keep your MCU operating in case of a power
failure.
Place the RMX 1500 on a hard, flat surface such as a desktop or mount it on 19" rack.
The airflow of the RMX 1500 is from front to back. Be sure that the areas in the front and
rear side of the system are clear for proper ventilation.
Unpacking the RMX
Installing the RTM ISDN card on the RMX
Installing the RMX in a rack or as a standalone
Connecting the RMX to the power source
Connecting the network (LAN, IP and ISDN) cables to the RMX
When you receive the RMX 1500 packing case, inspect the equipment for damage and
verify that the components match the packing slip.
Open the top cover of the packing case.
Boxes are placed on the top Stratocell® and contain the following:
— Installation Accessories. This kit contains the power cables, 3 ethernet cables, USB
key and documentation.
— Rack Installation Accessories. This kit contains the accessories for the 19" rack.
— Optional - ISDN Package. Contains the ISDN card and ISDN Software License.
Polycom, Inc.