Polycom RealPresence 800s Getting Started Manual page 42

RealPresence Collaboration Server 800s/Virtual Edition Getting Started Guide
Fast Configuration Wizard – IP Signaling
Field
Media Card 1
IP Addresses
Subnet Mask
• To set the Collaboration Server to Secured Communication, first complete the Fast Configuration
Wizard and reset the Collaboration Server. After Login, install the Certificate and then enable
Secured Communication Mode.
• The IP Network Service configured using the Fast Configuration Wizard will be saved only if
Media cards are installed in the Collaboration Server.
2 Click Next.
Enter the required Routers information in the dialog box.
Polycom®, Inc.
Description
In the RealPresence Collaboration Server 800s, one IP address is used for the
signaling and media.
Enter the address to be used by IP endpoints when dialing into the MCU.
Dial out calls from the Collaboration Server are initiated from this address.
This address is used to register the Collaboration Server with a Gatekeeper or a SIP
Proxy server.
Enter the subnet mask of the MCU.
Default value: 255.255.255.0.
34