Omron SYSMAC CJ Series User Manual page 228

8 Pulse Outputs
Preparations
PLC Setup
Origin Search Detailed Settings for pulse output 0
Note The setting of the option to use the origin search is read from the PLC Setup when the power supply is
turned ON.
DM Area Settings
• Starting Frequency
Setting
X axis starting frequency
Y axis starting frequency
• PLS2(887) Settings to Move from Origin to Position A
X axis Acceleration rate: 2,000 pps/4 ms
Deceleration rate: 2,000 pps/4 ms
Target frequency: 100,000 pps
Number of output pulses: 5,000 pulses
Y axis Acceleration rate: 2,000 pps/4 ms
Deceleration rate: 2,000 pps/4 ms
Target frequency: 100,000 pps
Number of output pulses: 5,000 pulses
8-68
Setting
Word
D0
D2
Setting
Data
#0000
#0000
Word
D10 #07D0
D11 #07D0
D12 #86A0
D13 #0001
D14 #1388
D15 #0000
D20 #07D0
D21 #07D0
D22 #86A0
D23 #0001
D24 #1388
D25 #0000
CJ2M CPU Unit Pulse I/O Module User's Manual
Data