Displaying Copp Configuration - Dell S6100 Configuration Manual

The following example shows creating the control plane service policy.
Dell#conf
Dell(conf)#control-plane
Dell(conf-control-plane)#service-policy rate-limit-cpu-queues cpuq_rate_policy

Displaying CoPP Configuration

The CLI provides show commands to display the protocol traffic assigned to each control-plane queue and the current rate-limit applied to
each queue. Other show commands display statistical information for trouble shooting CoPP operation.
To view the rates for each queue, use the show cpu-queue rate cp command.
Viewing Queue Rates
Example of Viewing Queue Rates
Dell#show cpu-queue rate cp
Service-Queue
--------------
Q0
Q1
Q2
Q3
Q4
Q5
Q6
Q7
Q8
Q9
Q10
Q11
Example of Viewing Queue Mapping
To view the queue mapping for each configured protocol, use the show ip protocol-queue-mapping command.
Dell#show ip protocol-queue-mapping
Protocol Src-Port
-------- --------
TCP (BGP) any/179
UDP (DHCP) 67/68
UDP (DHCP-R) 67
TCP (FTP) any
ICMP any
IGMP any
TCP (MSDP) any/639
UDP (NTP) any
OSPF any
PIM any
UDP (RIP) any
TCP (SSH) any
TCP (TELNET) any
VRRP any
Dell#
To view the queue mapping for the MAC protocols, use the show mac protocol-queue-mapping command.
Example of Viewing Queue Mapping for MAC Protocols
Dell# show mac protocol-queue-mapping
Protocol Destination Mac
-------- ---------------
ARP any
FRRP 01:01:e8:00:00:10/11
Rate (PPS) Burst (Packets)
----------- ----------
600
1000
300
1300
2000
400
400
400
600
600
600
300
Dst-Port TcpFlag Queue EgPort Rate (kbps)
-------- ------- ----- ------ -----------
179/any _
68/67 _
67 _
21 _
any _
any _
639/any _
123 _
any _
any _
520 _
22 _
23 _
any _
EtherType
---------
0x0806
any
512
50
50
50
50
50
50
50
50
50
50
50
Q9 _ _
Q10 _ _
Q10 _ _
Q6 _ _
Q6 _ _
Q11 _ _
Q11 _ _
Q6 _ _
Q9 _ _
Q11 _ _
Q9 _ _
Q6 _ _
Q6 _ _
Q10 _ _
Queue EgPort Rate (kbps)
----- ------ -----------
Q5/Q6 CP _
Q7 CP _
Control Plane Policing (CoPP) 233