Displaying Copp Configuration - Dell S6100 Configuration Manual

CPU-PROTOCOL-GROUP
protocol-list protocol1, protocol2, protocol3,.....
The list of protocols that you specify using this command are associated with the protocol group that you created in Step1.
3 Exit the CPU PROTOCOL GROUP mode.
CPU-PROTOCOL-GROUP
exit
The command prompt enters the configuration mode.
4 Create a CoPP profile.
CONFIGURATION
copp-profile profile-name
The system enters the CoPP profile mode.
5 Assign a protocol group or a QoS policy to the CoPP profile that you have created.
COPP-PROFILE
cpu-queue queue-number {protocol-group group-name [qos-policy policy-name] | qos-policy
policy-name}
6 Enter Control Plane mode.
CONFIGURATION
control-plane-cpuqos
7 Apply the CoPP policy to the system.
CONTROL-PLANE-CPUQOS
copp-policy profile-name
The CoPP policy that you have specified is applied to the system.

Displaying CoPP Configuration

The CLI provides show commands to display the protocol traffic assigned to each control-plane queue and the current rate-limit applied to
each queue. Other show commands display statistical information for trouble shooting CoPP operation.
To view the rates for each queue, use the show cpu-queue rate cp command.
Viewing Queue Rates
Example of Viewing Queue Rates
Dell#show cpu-queue rate cp
Service-Queue
--------------
Q0
Q1
Q2
Q3
Q4
Q5
Q6
Q7
Q8
Q9
244 Control Plane Policing (CoPP)
Rate (PPS) Burst (Packets)
----------- ----------
600
1000
300
1300
2000
400
400
400
600
600
512
50
50
50
50
50
50
50
50
50