Configuring Ipv6 Mbgp; Configuration Considerations - Dell PowerConnect B-RX Configuration Manual

Bigiron rx series configuration guide v02.8.00
Hide thumbs Also See for PowerConnect B-RX:
Table of Contents

Advertisement

Configuring IPv6 MBGP

Brocade's implementation of IPv6 supports multi protocol BGP (MBGP) extensions, which allow
IPv6 BGP (known as BGP4+) to distribute routing information for protocols such as IPv4 BGP. The
supported protocols are identified by address families. The extensions allow a set of BGP4+ peers
to exchange routing information for multiple address families and sub-address families.
IPv6 MBGP functions similarly to IPv4 MBGP except for the following enhancements:

Configuration considerations

The following are the configuration considerations:
Configuring IPv6 MBGP
1. Optional – Set the maximum number of multicast routes supported by the BigIron RX.
2. Enable IPv6 MBGP by doing the following:
3. Identify the neighboring IPv6 MBGP routers.
4. Optional – Configure an IPv6 MBGP default route.
5. Optional – Configure an IPv6 multicast static route.
6. Optional – Configure an IPv6 MBGP aggregate address.
7.
8. Save the configuration changes to the startup-config file.
BigIron RX Series Configuration Guide
53-1002253-01
An IPv6 unicast address family and network layer reachability information (NLRI).
Next hop attributes that use IPv6 addresses.
IPv6 MBGP does not redistribute DVMRP routes. It redistributes static routes only.
You cannot redistribute IPv6 MBGP routes into BGP4.
The BigIron RX supports 8192 multicast routes by default. You may need to increase the
maximum number of multicast routes for MBGP. You can configure the device to support up to
153,600 multicast routes.
Enable PIM Sparse Mode (PIM SM) or PIM Dense Mode (PIM DM) globally and on the
individual Reverse Path Forwarding (RPF) interfaces. PIM must be running on the device in
order for the device to send multicast prefixes to other multicast routers.
Enable BGP4. If this is the first time you have configured BGP4 on this device, you also
need to specify the local AS number.
Optional – Configure a route map to apply routing policy to multicast routes.
Chapter
46
1187

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bigiron rx series

Table of Contents