Disabling Or Re-Enabling Syslog; Specifying A Syslog Server; Specifying An Additional Syslog Server - Dell PowerConnect B-RX Configuration Manual

BigIron RX(config)# show log
Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
Static Log Buffer:
Dynamic Log Buffer (50 entries):
21d07h02m40s:warning:list 101 denied tcp 209.157.22.191(0)(Ethernet 4/18
0010.5a1f.77ed) -> 198.99.4.69(http), 1 event(s)
19d07h03m30s:warning:list 101 denied tcp 209.157.22.26(0)(Ethernet 4/18
0010.5a1f.77ed) -> 198.99.4.69(http), 1 event(s)
17d06h58m30s:warning:list 101 denied tcp 209.157.22.198(0)(Ethernet 4/18
0010.5a1f.77ed) -> 198.99.4.69(http), 1 event(s)

Disabling or re-enabling Syslog

Syslog is enabled by default. To disable it, enter the following command at the global CONFIG level.
BigIron RX(config)# no logging on
Syntax: [no] logging on [<udp-port>]
The <udp-port> parameter specifies the application port used for the Syslog facility. The default is
514.
To re-enable logging, enter the following command.
BigIron RX(config)# logging on
This command enables local Syslog logging with the following defaults:
•
•
•

Specifying a Syslog server

To specify a Syslog server, enter a command such as the following.
BigIron RX(config)# logging host 10.0.0.99
For backward compatibility, the software reads the old command syntax from the startup
configuration, and converts it to the new command syntax in the running configuration.
Syntax: logging host <ip-addr> | <server-name>

Specifying an additional Syslog server

To specify an additional Syslog server, enter the logging host <ip-addr> command again, as in the
following example. You can specify up to six Syslog servers.
Enter a command such as the following.
BigIron RX(config)# logging host 10.0.0.99
BigIron RX Series Configuration Guide
53-1002253-01
Buffer logging: level ACDMEINW, 38 messages logged
level code: A=alert C=critical D=debugging M=emergency E=error
I=informational N=notification W=warning
Messages of all severity levels (Emergencies – Debugging) are logged.
Up to 50 messages are retained in the local Syslog buffer.
No Syslog server is specified.
Configuring the Syslog service
A
1295