Displaying Mld Definitions For An Interface - Dell PowerConnect B-RX Configuration Manual

Bigiron rx series configuration guide v02.8.00

Hide thumbs Also See for PowerConnect B-RX:

Table of Contents

Multicast Listener Discovery and source specific multicast protocols (MLDv2)

BigIron RX #show ipv6 mld group

Interface e6/18 has 11 groups

This field...

Interface <port-number> has x

ipv6 address

Syntax: show ipv6 mld group

Displaying MLD definitions for an interface

To display the MLD parameters on an interface, including the various timers, the current querying

router, and whether or not MLD is enabled, enter the following command.

BigIron RX #show ipv6 mld interface

version = 2, query int = 125, max resp time = 10, group mem time = 635

robustness = 5, other querier present time = 630

last listener query int = 1, last listener query count = 5

e5/18: default V2, PIM sparse, addr=fe80::20c:dbff:fe80:5251

has 50 groups, Querier, default V2

group: ff1e::619, exclude, permit 0, exclude-time=513, deny 0

group: ff1e::618, exclude, permit 0, exclude-time=513, deny 0

group: ff1e::617, exclude, permit 0, exclude-time=513, deny 0

group: ff1e::616, exclude, permit 0, exclude-time=513, deny 0

group: ff1e::5a8, exclude, permit 0, exclude-time=513, deny 0

group: ff1e::5a7, exclude, permit 0, exclude-time=513, deny 0

group: ff1e::5a6, exclude, permit 0, exclude-time=513, deny 0

This message shows the ID of the interface and how many multicast groups it

Index for the MLD group.

IPv6 address of the multicast group.

The physical port to which the group belongs.

Indicates if the group is a static group or not.

Indicates if the multicast group is a querier or not

The number of seconds the interface can remain in its current mode.

Indicates if the filter mode of the multicast group is in INCLUDE or EXCLUDE

phy-port static querier life mode

BigIron RX Series Configuration Guide

53-1002253-01

Bigiron rx series