Dell PowerConnect B-RX Configuration Manual page 1256

Bigiron rx series configuration guide v02.8.00
Hide thumbs Also See for PowerConnect B-RX:
Table of Contents

Advertisement

45
Displaying BGP4+ information
TABLE 205
This field...
Status
AS-PATH
For example, to display detailed information about the best routes to a destination received from
neighbor 2000:4::106, enter the following command.
BigIron RX# show ipv6 bgp neighbor 2000:4::106 routes detail best
Searching for matching routes, use ^C to quit...
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
1
2
This display shows the following information:
1180
Summary of best and unreachable routes from a BGP4+ neighbor (Continued)
There are 2 accepted routes from neighbor 2000:4::106
E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH S:SUPPRESSED F:FILTERED
Prefix: 2002::/16,
NEXT_HOP: 2000:4::106,
LOCAL_PREF: 100,
AS_PATH: 65001
Prefix: 2002:1234::/32,
NEXT_HOP: 2000:4::106,
LOCAL_PREF: 100,
AS_PATH: 65001
Displays...
The route's status, which can be one or more of the following:
A – AGGREGATE. The route is an aggregate route for multiple
networks.
B – BEST. BGP4+ has determined that this is the optimal route to
the destination.
C – CONFED_EBGP. The route was learned from a neighbor in the
same confederation and AS, but in a different sub-AS within the
confederation.
D – DAMPED. This route has been dampened (by the route
dampening feature), and is currently unusable.
E – EBGP. The route was learned through a switch in another AS.
H – HISTORY. Route dampening is configured for this route, and the
route has a history of flapping and is unreachable now.
I – IBGP. The route was learned through a switch in the same AS.
L – LOCAL. The route originated on this switch.
M – MULTIPATH. BGP4+ load sharing is enabled and this route was
selected as one of the best ones to the destination. The best route
among the multiple paths also is marked with "B".
NOTE: If the "m" is shown in lowercase, the software was not able to
install the route in the IPv6 route table.
S – SUPPRESSED. This route was suppressed during aggregation
and thus is not advertised to neighbors.
F – FILTERED. This route was filtered out by BGP4+ route policies
on the switch, but the switch saved updates containing the filtered
routes.
The AS-path information for the route.
Status: BE,
Age: 18h48m56s
Learned from Peer: 2000:4::106 (65001)
MED: 1,
ORIGIN: incomplete,
Status: BE,
Age: 18h48m56s
Learned from Peer: 2000:4::106 (65001)
MED: 1,
ORIGIN: incomplete,
Weight: 0
Weight: 0
BigIron RX Series Configuration Guide
53-1002253-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bigiron rx series

Table of Contents