Dell PowerConnect B-RX Configuration Manual page 1254

45
Displaying BGP4+ information
BigIron RX# show ipv6 bgp neighbor 2000:4::110 rib-out-routes detail
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST E:EBGP I:IBGP L:LOCAL
1
2
This display shows the following information:
TABLE 204
This field...
Number of RIB_out routes for a
specified neighbor (appears only in
display for all routes)
Status codes
Prefix
Status
Age
Next Hop
Learned from Peer
LOCAL_PREF
MED
Origin
Weight
AS-PATH
Displaying the best and unreachable routes received from a BGP4+ neighbor
You can display a summary or detailed information about the following types of BGP4+ routes
received from a specified neighbor:
1178
There are 2 RIB_out routes for neighbor 2000:4::110
Prefix: 2002:1234::/32,
NEXT_HOP: ::, Learned from Peer: Local Router
LOCAL_PREF: 100, MED: 1,
AS_PATH:
Adj_RIB_out count: 1,
Prefix: 2002::/16, Status: BL,
NEXT_HOP: ::, Learned from Peer: Local Router
LOCAL_PREF: 100, MED: 1,
AS_PATH:
Detailed RIB route information for a BGP4+ neighbor
Status: BL, Age: 6d18h17m53s
ORIGIN: incomplete,
Admin distance 190
Age: 6d18h21m8s
ORIGIN: incomplete,
Displays...
For information about this field, refer to
For information about this field, refer to
For information about this field, refer to
For information about this field, refer to
The age of the RIB route, in seconds.
For information about this field, refer to
The IPv6 address of the neighbor from which this route is learned. "Local
Router" indicates that the switch itself learned the route.
For information about this field, refer to
The value of the RIB route's MED attribute. If the route does not have a
metric, this field is blank.
The source of the route information. The origin can be one of the
following:
•
EGP – The routes with this set of attributes came to BGP4+ through
EGP.
•
IGP – The routes with this set of attributes came to BGP4+ through
IGP.
•
INCOMPLETE – The routes came from an origin other than one of
the above. For example, they may have been redistributed from
OSPFv3 or RIPng.
When BGP4+ compares multiple routes to a destination to select the
best route, IGP is preferred over EGP and both are preferred over
INCOMPLETE.
For information about this field, refer to
For information about this field, refer to
Weight: 32768
Weight: 32768
Table 203 on page 1177.
Table 203 on page 1177.
Table 203 on page 1177.
Table 203 on page 1177.
Table 203 on page 1177.
Table 203 on page 1177.
Table 203 on page 1177.
Table 203 on page 1177.
BigIron RX Series Configuration Guide
53-1002253-01