Dell PowerConnect B-RX Configuration Manual page 1248

45
Displaying BGP4+ information
Displaying last error packet from a BGP4+ neighbor
You can display information about the last packet that contained an error from any of a switch's
neighbors. The displayed information includes the error packet's contents decoded in a
human-readable format.
For example, to display information about the last error packet from any of a switch's neighbors,
enter the following command.
BigIron RX# show ipv6 bgp neighbor last-packet-with-error
No received packet with error logged for any neighbor
Syntax: show ipv6 bgp neighbor last-packet-with-error
This display shows the following information:
TABLE 200
This field...
Total number of BGP Neighbors
Last error
Displaying outbound route filters received from a BGP4+ neighbor
You can display the Outbound Route Filters (ORFs) received from a BGP4+ neighbor. This option
applies to cooperative route filtering feature.
For example, to display the ORFs received from neighbor 2000:2::110, enter the following
command.
BigIron RX# show ipv6 bgp neighbor 2000:2::110 received prefix-filter
ip prefix-list 2000:2::110: 4 entries
Syntax: show ipv6 bgp neighbor <ipv6-address> received prefix-filter
The <ipv6-address> parameter displays the prefix filter learned from a specified neighbor. You
must specify this address in hexadecimal using 16-bit values between colons as documented in
RFC 2373.
Displaying routes received from a BGP4+ neighbor
You can display a summary or detailed route information received in route updates from a specified
BGP4+ neighbor since you enabled the soft reconfiguration feature.
For example, to display a summary of the route information received in route updates from
neighbor 2000:4::10, enter the following command at any level of the CLI.
1172
Total number of BGP Neighbors: 266
Last error packet information for BGP4+ neighbors
seq 5 permit 3000:3::45/16 ge 18 le 28
seq 10 permit 4000:4::88/24
seq 15 permit 5000:5::37/8 le 32
seq 20 permit 6000:6::83/16 ge 18
Displays...
The total number of configured neighbors for a switch.
The error packet's contents decoded in a human-readable format or
notification that no packets with an error were received.
BigIron RX Series Configuration Guide
53-1002253-01