Displaying The Log File Table - Dell PowerConnect 5324 User Manual

The following is an example of the CLI commands:
console# show logging
Logging is enabled.
Console Logging: Level info. Console Messages: 0 Dropped.
Buffer Logging: Level info. Buffer Messages: 26 Logged, 26
Displayed, 200 Max.
File Logging: Level error. File Messages: 157 Logged, 26
Dropped.
1 messages were not logged
01-Jan-2000 01:03:42 :%INIT-I-Startup: Cold Startup
01-Jan-2000 01:01:36 :%LINK-W-Down:
01-Jan-2000 01:01:36 :%LINK-W-Down:
01-Jan-2000 01:01:36 :%LINK-W-Down:
01-Jan-2000 01:01:36 :%LINK-W-Down:
01-Jan-2000 01:01:36 :%LINK-W-Down:
01-Jan-2000 01:01:36 :%LINK-W-Down:
01-Jan-2000 01:01:36 :%LINK-W-Down:
01-Jan-2000 01:01:36 :%LINK-W-Down:
01-Jan-2000 01:01:36 :%LINK-W-Down:
1-Jan-2000 01:01:36 :%LINK-W-Down:
01-Jan-2000 01:01:36 :%LINK-W-Down:
01-Jan-2000 01:01:32 :%INIT-I-InitCompleted:
Initialization task is completed
Console # clear logging
clear logging buffer [y/n]?
Console #

Displaying the Log File Table

The Log File Table contains information about log entries saved to the Log File in FLASH,
g24
g23
g22
g21
g20
g19
g18
g17
g13
g2
g1
Configuring System Information
111