Displaying The Log File Table - Dell PowerConnect 5316M User Manual

The following is an example of the CLI commands:
console# show logging
Logging is enabled.
Console Logging: Level info. Console Messages: 0 Dropped.
Buffer Logging: Level info. Buffer Messages: 26 Logged, 26
Displayed, 200 Max.
File Logging: Level error. File Messages: 157 Logged, 26
Dropped.
1 messages were not logged
01-Jan-2000 01:03:42 :%INIT-I-Startup: Cold Startup
01-Jan-2000 01:01:36 :%LINK-W-Down: g14
01-Jan-2000 01:01:36 :%LINK-W-Down: g13
01-Jan-2000 01:01:36 :%LINK-W-Down: g12
01-Jan-2000 01:01:36 :%LINK-W-Down: g15
01-Jan-2000 01:01:32 :%INIT-I-InitCompleted:
Initialization task is completed
console# clear logging
Clear Logging Buffer [y/n]?

Displaying the Log File Table

The Log File Table contains information about log entries saved to the Log File in FLASH,
including the time the log was entered, the log severity, and a description of the log message. To
open the Log File Table, click System
96
Configuring System Information
→ →
Logs Log File in the tree view.