Dell PowerConnect B-RX Configuration Manual page 48

TABLE 3
Enhancement
MAC Port Security
Syslog update
Enhancements in release 02.7.02
TABLE 4
Enhancement
System features
Enhanced spreed-duplex
command
Enhancements in release 02.7.01
TABLE 5
Enhancement
True Remote Console
Limited/Fixed Boot Code
xlviii
Summary of enhancements in release 02.7.03
Description
The MAC Port Security feature has been
updated for the 02.7.03 release.
The System Log has been updated as follows:
•
Separate buffers for static and dynamic
logs
•
Entries in the static log buffer are cleared
at reset or reload, while entries in the
dynamic log are preserved
•
Log buffer size cannot be changed. the log
buffer size is set at 3800 lines
•
A show logging command is now available
at the monitor level for Active and Standby
Management Processors
Summary of enhancements in release 02.7.02
Description
The speed-duplex command has been
enhanced to support 24F and 24HF modules.
The auto (Autonegotiation mode) option has
also been added to allow the user to set the
speed on E1MG-TX media.
Summary of enhancements in release 02.7.01
Description
The new rconsole feature provides a true
connection to the MP/LP console port. While the
old session-based rconsole is a remote X-Window
which is connected to one of the windows on the
target system, the new rconsole is a remote
desktop.
See page
Book: BigIron RX Configuration
Giuide
Chapter: "Using the MAC Port
Security Feature and Transparent
Port Flooding" on page 947
Book: BigIron RX Configuration
Giuide
Chapter: "Using Syslog" on
page 1289
See page
Book: BigIron RX Series
Configuration Guide
Chapter: "Configuring Interface
Parameters"
Section: "Speed/Duplex
negotiation"
See page
N/A
Book: Foundry BigIron RX
Configuration Guide
Chapter:
Section:
BigIron RX Series Configuration Guide
53-1002253-01