Authentication Configuration (Network Authentication) - Xerox ColorQube 9201 System Administrator Manual

Authentication Configuration (Network Authentication)

Procedure (Initial Use)
Initially when Setup is selected (at your workstation web browser: Properties > Security > Access
Rights > Setup), Step 1 of 3 for Authentication Configuration will display.
• Authentication Configuration - Step 1 of 3
This screen explains the concepts of Authentication, Authorization, and Personalization.
• Authentication - Determines that the person who logs in has given the proper credentials
and is known to the system.
• Authorization - Determines what an authenticated user can do, for example, the
authenticated user has permission to use the Copy Service.
• Personalization - Adds personal settings for the authenticated user optimizing productivity,
for example, automatically enter my email address to the From field.
• Authentication Configuration - Step 2 of 3
This page allows you to select methods for:
• Device User Interface Authentication.
• Web User Interface Authentication.
• Authorization.
• Personalization.
Note: Web User Interface Authentication only needs to be defined if you have specified Xerox
Secure Access as the method of authentication.
• Authentication Configuration - Step 3 of 3
This page displays the current status and configuration of Authentication, Authorization and
Personalization. This page is used for confirming or editing the authentication options that were
established on Step 2 of 3.
• Once the Authentication Configuration Steps have been completed, click on the [Finish] button.
Procedure (Subsequent Use)
The following steps are written as subsequent use, assuming that the initial Authentication
Configuration has previously been completed.
Authentication Configuration for Kerberos (Solaris)
1. At your Workstation, open the web browser and enter the IP address of the device in the Address
bar, and press [Enter].
2. Click the [Properties] tab.
3. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4. Click on the [Login] button.
Click on the [Security] link.
5.
6. Click on the [Access Rights] link.
7. Select [Setup] in the directory tree.
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
Authentication
123