Network Installation
UNIX
HP-UX Client (Version 10.x)
HP-UX workstations require specific installation steps to communicate with the machine. The machine
is a BSD-style UNIX printer, whereas HP-UX is a System Vstyle UNIX. Use the correct case when
entering commands; UNIX commands are case-sensitive.
Note:
All UNIX commands are case-sensitive, so enter the commands exactly as they are written.
Information Checklist
Before starting the procedure, please ensure the following items are available or have been performed:
•
Ensure that the correct IP Address is being used for the machine. To verify this, print a
Configuration Report from the device.
At the Device:
a.
Press the <Machine Status> button on the device.
b.
Touch the [Machine Information] tab.
c.
Touch [Information Pages].
d.
Touch [Configuration Report].
e.
Touch [Print], then touch [Close].
The Configuration Report will print. Verify the addresses detailed under TCP/IP Settings.
•
Ensure the machine is connected to the network with Ethernet cabling.
•
Ensure you can PING the machine IP address from the UNIX workstation.
Configure the Client
1.
Add the machine hostname to the etc/hosts file on the HP-UX workstation or DNS server.
2.
Ensure that you can ping the machine from the HP-UX workstation, using the hostname found in
the /etc/hosts file.
3.
Use either the GUI method or the tty Method as follows:
GUI Method
1.
Open a command window from the desktop.
2.
Type [su] to become super user.
3.
Type [sam] to start the System Administrator Manager (SAM).
4.
Select the [Printers and Plotters] icon.
5.
Select [lp] spooler.
6.
Select [Printers and Plotters].
7.
Select [Actions: Add Remote Printer/Plotter...].
8.
Enter the following information into the Add Remote Printer/Plotter form:
•
[Printer Name: printer name]. Where printer name is the name of the queue being created.
•
[Remote System Name: hostname]. Where hostname is the machine hostname from the
/etc/hosts file.
100
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide