Meter Assistant - Xerox ColorQube 9201 System Administrator Manual

General Setup
9. In the HTTP Proxy Server area:
a. Check the [Enabled] checkbox.
b. Select either [IPv4 Address], [IPv6 Address] or [Host Name].
c. Enter the Proxy Server address and port number in the [Proxy Server Address] field.
d. Click on the [Save] button to return to the SMart eSolution Setup page.
e. Click on the [Apply] button.
Note: HTTP Proxy Server settings are used for the following features:
• SMart eSolution Setup.
• HTTP(S) File Destinations.
• HTTP(S) Template Pool.

Meter Assistant

Meter Assistant is a feature of SMart eSolutions. It provides detailed information, including dates,
times, and counts of impressions sent in the last billing meter transmission.
The meter data is recorded in the Xerox service management system. It is used for the invoicing of
metered service agreements, and also for evaluating consumable usage against printer performance.
The automatic collection of the meter reads will ensure quality and reliability of the data we use to
manage your service agreements.
To enable Meter e-mail alert:
Up to three groups can be sent email alerts regarding the device status.
Sending device data to Xerox immediately:
1. At your Workstation, open the Web browser and enter the IP address of the device in the Address
bar, and press [Enter].
2. Click on the [Status] tab.
3. Select [SMart eSolutions] in the directory tree.
Click on the [Meter Assistant] tab.
4.
5. For Meter E-mail Alerts, click on the [Configure] button (initial use) or [Edit] button (subsequent
use).
6. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
7. Click on the [Login] button to display the E-mail Alerts screen.
f. In the [Recipient Group Addresses] area, check the required Group.
g. Click the field under E-mail Addresses, and enter e-mail address or addresses.
h. Continue to add e-mail addresses to create your Alert Notification group, as required.
i. In the [Reply to E-mail Address] field, enter the address of the administrator or user who is
designated to receive any reply e-mails that are sent by users who are listed in the Alert
Notification group.
Note: This is normally set to the System Administrator's e-mail address.
36 Xerox ColorQube™ 9201/9202/9203
System Administrator Guide