Billing Information And Usage Counters; Banner Sheet - Xerox ColorQube 9201 System Administrator Manual

General Setup
10. Click on the [OK] button when you see the message "Properties have been successfully
modified".
Low Supply Warning
System Administrators can set the device to display a low warning message about a supplies level, for
example, ColorQube Ink, Cleaning Unit and Document Feeder Feed Roller.
1. At your Workstation, open the web browser and enter the IP address of the device in the Address
bar, and press [Enter].
2. Click on the [Properties] tab.
If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
3.
4. Click on the [Login] button.
5. Click on the [General Setup] link.
6. Click on the [Alert Notification] link.
7. Select [Low Supply Warning] in the directory tree.
8. In the Days Remaining area, select a value from either ColorQube Ink, Cleaning Unit or/and
Document Feeder Feed Roller drop-down menu.
Note: If you set the value to '0', then the user will get a 'NO WARNING MESSAGE' that the Supply
is getting low.
9. Click on the [Apply] button to accept the changes or [Undo] to return the settings to their
previous values.
10. Click on the [OK] button when you see the message "Properties have been successfully
modified".

Billing Information and Usage Counters

The Billing and Counters page provides the Billing information for the device, including number of
impressions printed or copied.
1. At your Workstation, open the web browser and enter the IP address of the device in the Address
bar, and press [Enter].
2. Click on the [Status] tab.
3. Select [Billing Information] in the directory tree to view Current Billing information. and click on
the [Refresh] button to refresh Billing information.
4. Select [Usage Counters] in the directory tree to view the counts from the Usage Counters; click on
the [Refresh] button to refresh the Usage Counters.

Banner Sheet

When documents are sent to print at the device, a banner sheet is printed identifying the PC that sent
the print job. It is possible to disable this setting both within the print driver and from the device
administrator tools. These instructions describe how to disable the banner sheet from the device.
At the Device:
1. Press the <Log In/Out> button to enter the Tools pathway.
44 Xerox ColorQube™ 9201/9202/9203
System Administrator Guide