Network Authentication - Xerox ColorQube 9301 System Administrator Manual

Troubleshooting Conflicting Permissions
1. In CentreWare Internet Services, click Properties > Security > Authentication.
2. Click Troubleshooting.
Click Permission Summary next to a user name to see a summary of permissions for that user.
3.
Temporarily Disabling Print Permissions for all Users
1. On the Troubleshooting page, click Permission Enablement Options.
Click Disable Print Restrictions to disable print restrictions for all users.
2.
3. Click Enable Print Restrictions to enable print restrictions.

Network Authentication

When network authentication is configured, users log in at the control panel. The printer compares the
user credentials to the information stored on an authentication server.
Setting up Network Authentication
1. In CentreWare Internet Services, click Properties > Security > Authentication.
Click Setup.
2.
3. Click Edit.
4. Under Authentication method on the machine's touch interface, select User Name/Password
Validated Remotely on the Network.
5. Under Authorization information is stored, select Remotely on the Network.
6. Enable personalization if you want to allow the printer to retrieve user information, such as email
address or home directory, from an LDAP server. Select the check box next to Automatically retrieve
the following information for the authenticated user from LDAP.
Note: LDAP settings must be configured to use personalization.
7. Click Save to apply the new settings or Undo to retain the previous settings.
Click Cancel to return to the previous page.
ColorQube 9301/9302/9303 Multifunction Printer
System Administrator Guide
Security
65