Xerox ColorQube 9201 System Administrator Manual page 256
Xerox printers system administrator guide
Hide thumbs
Also See for ColorQube 9201:
- User manual (331 pages) ,
- Quick manual (16 pages) ,
- Secure installation and operation (12 pages)
Table of Contents
Advertisement
Embedded Fax
2.
Touch the [Original Size] icon.
a.
Select one of the following method for the device to determine the size of the original fax
documents:
•
Auto Detect - this method enables the device to identify the size of the original
automatically.
•
Preset Scan Areas - this method allows you to quickly define the scan area using the
standard paper size dimensions. If selected, from the Scan Area Presets list touch to
select the required dimension.
•
Custom Scan Area - this method allows you to manually enter the dimension specifying
the scan area. If selected, for the Scan Area, touch the Up/Down arrows for [Height - Y]
and [Width - X] to specify the dimension.
•
Mixed Size Originals - this method allows you to scan originals of different sizes at one
time without any additional changes.
b.
Touch [Save] to return to the Layout Adjustment tab.
3.
Touch the [Reduce/Split] icon.
a.
Select one of the following method to determine how the receiving device will handle images
that are to large:
•
Reduce to Fit - this method will shrink the large document to fit on a smaller size paper.
•
Split Across Pages - this method will continue a single image across several pages.
b.
Touch [Save] to return to the Layout Adjustment tab.
Fax Options
1.
From the Fax Service - Setting screen, select the Fax Options tab.
2.
Touch the [Starting Rate] icon.
c.
Select one of the following starting speed for the transmission of the embedded fax job:
•
Super G3 (33.6 Kbps)
•
G3 (14.4 Kbps)
•
Forced (4800 bps)
d.
Touch [Save] to return to the Fax Options tab.
e.
Touch [Send Header Text] icon.
f.
Select [On] to allow the header text set by the System Administrator.
Touch [Save] to return to the Fax Options tab.
g.
Select the Fax Country Setting
At the Device:
1.
Press the <Log In / Out> button to enter the Tools pathway.
2.
Enter the Administrator's User Name [admin], touch [Next], enter Password [1111], touch
[Enter].
3.
Press the <Machine Status> button, then touch the [Tools] tab.
4.
Touch [Service Settings].
5.
Touch the [Embedded Fax Settings] to display the Embedded Fax Settings screen.
6.
Touch the [Fax Country Setting], to display the Country Setup screen.
248
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
Advertisement
Table of Contents
Troubleshooting
