Add The Printer - Xerox ColorQube 9201 System Administrator Manual

7. Check the checkbox to select [Print Services for UNIX].
8. Click [OK].
9. Click [Next].
10. Close the [Add/Remove Programs] window.

Add the Printer

1. From the [Start] menu, select [Settings] and then [Printers]/[Printers and Faxes].
2. Double-click [Add Printer] and click on [Next].
3. Select [Local Printer] (Windows 2000) or [Local Printer attached to this computer] (Windows
2003) and deselect [Automatically detect and install my Plug and Play printer].
Click [Next].
4.
5. Select [Create a New Port].
6. Select [LPR Port] from the Type drop-down menu and click [Next].
Note: The LPR Port is only available when Print Services for UNIX is installed.
7. Enter the IP Address of the printer.
8. Enter the printer name.
9. Click [OK].
10. You will be prompted for a print driver. Select [Have Disk] and click [Browse]. Locate the Drivers
folder on the CD.
11. Select the required driver.
12. Click [Open] and then [OK].
13. Select the model of your machine from the list. Click [Next].
14. The Name your Printer screen appears. Enter a printer name and click [Next].
15. The Printer Sharing Screen appears. If you will be sharing this printer with other clients select
[Share As] (Windows 2000) or [Share Name] (Windows 2003) and enter a share name. Click
[Next].
16. Enter a details in the [Location] and [Comment] if required. Click [Next].
17. Select [Yes] to print a test page. Click [Next].
18. Click [Finish]. The print driver will install.
Configure the Print Driver
1. From the [Start] menu, select [Settings] and then [Printers]/[Printers and Faxes].
2. Right click on the printer icon and select [Properties].
3. Click on the [Advance] tab, then click on [Printing Defaults].
4. Select the settings you wish to set for the printer.
For further information on Configuring the Print Driver and Installation, refer to the Print Drivers Guide
for Windows CD.
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
Print Drivers
109