Ssdp; Microsoft Networking - Xerox ColorQube 9201 System Administrator Manual

Network Installation
8. Click on the [OK] button when you see the message "Properties have been successfully
modified".

SSDP

Allows you to configure the SSDP (Simple Service Discovery Protocol) for Universal Plug and Play
settings on the device. SSDP provides a mechanism where by network clients, with little or no static
configuration, can discover network services. SSDP accomplishes this by providing for multicast
discovery support as well as server based notification and discovery routing.
1. At your Workstation, open the web browser and enter the IP address of the device in the Address
bar, and press [Enter].
2. Click on the [Properties] tab.
3. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4. Click on the [Login] button.
5. Click on the [Connectivity] link.
6. Click on the [Protocols] link.
7. Select [SSDP] in the directory tree.
8. In the [General] area:
a. For Protocol, check the [Enabled] checkbox to enable SSDP.
b. Enter the discovery expiration Cache Control, in minutes in the [Cache Control] field. The
range is from 1 to 43200 and default is 1440.
c. Enter the discovery advertisement Time to Live, measured in router hops in the [Time to Live]
field. the range is from 1 to 60 and the default is 4.
9. Click on the [Apply] button to accept the changes or [Undo] to return the settings to their
previous values.
10. Click on the [OK] button when you see the message "Properties have been successfully
modified".

Microsoft Networking

Configure Microsoft Networking
1. At your Workstation, open the web browser and enter the IP address of the device in the Address
bar, and press [Enter].
2. Click on the [Properties] tab.
3. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4. Click on the [Login] button.
5. Click on the [Connectivity] link.
Click on the [Protocols] link.
6.
7. Select [Microsoft Networking] in the directory tree.
8. In the General area:
a. For Protocol, check the [Enabled] checkbox to enable Microsoft Networking.
b. Enter the device's workgroup in the [Workgroup] field.
78 Xerox ColorQube™ 9201/9202/9203
System Administrator Guide