Configuring The Network Authentication - Xerox WorkCentre 6515 User Manual

System Administrator Functions

Configuring the Network Authentication

Network Authentication is a security protocol that requires users to provide their login credentials before
they can access the printer. The printer compares the user credentials to the information stored on an
authentication server.
To prove their identity, users can type their user credentials at the control panel, in the Embedded Web
Server, or they can use a card reader.
To configure access rights using network authentication:
• Provide information about your authentication server and configure authentication server settings.
• Enable Panel Lock. For details, refer to Managing Panel Lock.
• Ensure that service locks are set. For details, refer to Setting Service Locks.
• Ensure that Network Authentication is enabled. For details, refer to
page 267.
To access the authentication system:
1. At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to
the Administrator
Click Permissions.
3.
4. Click Login/Logout Settings.
5. For Network, click Edit.
For Network Login, select Kerberos, SMB, or LDAP, then click Next.
6.
7. Configure the LDAP server, authentication, and custom filter settings. For details, refer to the
configuration topic for your authentication system.
For reference:
Configuring an LDAP Authentication System
Configuring an SMB Authentication System
Configuring a Kerberos Authentication System
270 Xerox WorkCentre
®
User Guide
on page 265.
on page 271
on page 271
6515 Color Multifunction Printer
®
on page 272
Configuring Secure Settings
Logging In as
on