Xerox ColorQube 9201 System Administrator Manual page 123

12. When the Install from Disk screen appears, verify that the path and file name are correct, then
click [OK].
13. Select the model of your device from the list. Click [Next].
14. The Name your Printer screen appears. Enter a printer name.
15. Decide whether or not you want to make this printer your default printer, then click [Next].
16. The Printer Sharing Screen appears. If you will be sharing this printer with other clients select the
[Share Name] button and enter a share name. Click [Next].
17. Enter a location and comment in the [Location and Comment screen] (optional).
18. Select [Yes] to print a test page. Click [Next]
19. Click [Finish]. The print driver will install. At the device verify that the test page printed.
Configure the Print Driver
1. From the [Start] menu select [Printers and Faxes].
Right-click on the printer icon and select [Properties].
2.
3. Use the available tabs to set the printing defaults. Additional settings may be accessed by clicking
the [Printing Preferences] button on the General tab.
For further information on Configuring the Print Driver and Installation, refer to the Print Drivers Guide
for Windows CD.
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
Print Drivers
115