Xerox ColorQube 9201 System Administrator Manual page 207

3. Enter the [IP Address] and [Port] or [Host Name] and [Port] of the FTP server in the [Template
Pool Server] field.
4. In the [Script path and filename (from HTTP root)] field enter the path and file name of the
POST handling script or application used for filing. The script enables file transfers with the server.
For example: /directory name/folder name).
Click on the [Get Example Scripts] link to download a working example scripts.
5. Type in the path to the location of the scan folder in [Document Path]. Enter the full path to the
directory, starting at the root. For example, \\directory name\folder name.
6. If HTTPS is selected as a protocol, check the [Validate Repository SSL Certificate (trusted, not
expired, correct FQDN)] checkbox to have the server's SSL certificate validated for the correct
host name and checked for a signature of a trusted certificate authority.
7. For Login Credentials to Access the Destination, select [System] to have the system directly log
in to the file server.
8. Enter details in the [Login Name], [Password] and [Retype Password] field, if the system will be
directly accessing the file server.
Note: A Login (account) Name and (server) Password for the system to access the remote server.
This is mandatory for use with a SMARTsend server. For information on creating accounts on the
SMARTsend server, refer to the FreeFlow SMARTsend Installation and Administration Guide. Note
that these accounts directly support the Login Source settings, accessed by clicking General under
Workflow Scanning in Internet Services.
9. Check the [Select to save new password] checkbox if you need to change the password for an
existing Login Name.
10. Click on the [Apply] button to accept the changes or [Undo] to return the settings to their
previous values.
11. Click on the [OK] button when you see the message "Properties have been successfully
modified".
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
Workflow Scanning
199