Manual Setup - Xerox ColorQube 9201 System Administrator Manual

c. Check the [Display 24 hour clock] checkbox if you require a 24 hour format, if unchecked, a
12 hour format is displayed.
d. Using the Up and Down arrow select the required value for the following:
• Hours - for a 12 hour format the range is 1 to 12 and for a 24 hour format the range is 0
to23.
• Minutes - the range is 00 to 59.
• If 12 hour format is selected, select either AM or PM from the drop-down menu.
e. In the Time Zone area, select a time zone from the drop-down menu.
10. Click on the [Apply] button, the system will reboot.

Manual Setup

1. At your Workstation, open the web browser and enter the IP address of the device in the Address
bar, and press [Enter].
2. Click on the [Properties] tab.
3. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4. Click on the [Login] button.
5. Click on the [General Setup] link.
6. Click on the [Date and Time] link from the directory tree.
7. In the Setup area select [Manual (NTP Disabled)] from the Date and Time Setup drop-down
menu to use an NTP server.
8. In the Date & Time area:
a. For Format, select one of the following:
• MM/DD/YYYY
• DD/MM/YYYY
• YYYY/MM/DD
b. Using the Up and Down arrow select the required value for the following:
Day - the range will be dependant on the selected month.
•
• Month - the range is from 1 to 12.
• Year - the range is from 2007 to 2033.
c. Check the [Display 24 hour clock] checkbox if you require a 24 hour format, if unchecked, a
12 hour format is displayed.
d. Using the Up and Down arrow select the required value for the following:
• Hours - for a 12 hour format the range is 1 to 12 and for a 24 hour format the range is 0
to23.
• Minutes - the range is 00 to 59.
• If 12 hour format is selected, select either AM or PM from the drop-down menu.
Note: Any changes to these settings will require the device to reboot.
e. In the Time Zone area, select a time zone from the drop-down menu.
9. Click on the [Apply] button.
10. Click on the [OK] button when you see the message "Properties have been successfully
modified".
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
General Setup
27