Xerox ColorQube 9201 System Administrator Manual page 171

9. Click on the [OK] button when you see the message "Properties have been successfully
modified".
At the Device:
1. Press the <Log In/Out> button to enter the Tools pathway.
2. Enter the Administrator's User Name [admin], touch [Next], enter Password [1111], touch
[Enter].
3. Press the <Machine Status> button, then touch the [Tools] tab.
4. Touch [Network Settings].
5. Touch [Advanced Settings], touch [Continue].
6. In the Network Settings screen, touch [802.1X Settings].
In the 802.1X screen:
7.
a. Touch [Enable] button.
b. Touch [Authentication Method] to select the authentication method form the drop-down
menu.
c. Touch [Username] and enter the username, and touch the [Save] to return to the 802.1X
screen.
d. Touch [Password] and enter the password, and touch the [Save] to return to the 802.1X
screen.
e. Touch [Save].
8. Touch [Close].
9. Press the <Log In/Out> button, then touch [Logout] to exit the Tools pathway.
To Disable 802.1X
At your WorkStation:
1. Open the web browser and enter the IP address of the device in the Address bar, and press
[Enter].
2. Click the [Properties] tab.
3. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
Click on the [Login] button.
4.
5. Click on the [Security] link.
6. Select [802.1X] in the directory tree.
7. In the Configure 802.1X area, for Protocol, uncheck the [Enable 802.1X] checkbox to disable this
feature.
8. Click on the [Apply] button to save changes.
9. Click on the [OK] button when you see the message "Properties have been successfully
modified".
At the Device:
Press the <Log In/Out> button to enter the Tools pathway.
1.
2. Enter the Administrator's User Name [admin], touch [Next], enter Password [1111], touch
[Enter].
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
Security
163