Host Groups - Xerox ColorQube 9201 System Administrator Manual

Security
Saved Policies
13. In the Saved Policies area, there will be a list of all the policies saved.
14. To delete a policy, highlight the policy and click the [Delete] button.
15. Also you can make individual policy to be prioritized by clicking the [Promote] and [Demote]
buttons.
Disable IP Sec at the device
1. At the device, press the <Log In/Out> button to access the Tools pathway.
2. Enter the Administrator's User Name [admin], touch [Next], enter the Password [1111], touch
[Enter].
3. If necessary, press the <Machine Status> button, then touch the [Tools] tab.
4. In Tools menu, touch [Security Settings].
5. Touch [Image Overwrite Security].
Touch [IP Sec].
6.
7. Touch the [Disable IP Sec] button, then touch [Close].
8. Press the <Log In/Out> button to exit Tools pathway.
9. Touch [Logout].

Host Groups

Host Group page allows you to view and manage host group. A host group is a logical grouping of
hosts based on their specific IP address or subnet address range.This option displays all the Host Group
saved and the details of each Host Group.
1. Form the IP Sec page, click on the [Host Groups] tab under IPsec heading.
2. Host Groups can be deleted by highlighting a Host Group in the IP Host Group area, and clicking
on the [Delete] button, if the Host Group selected is not being used by a security policy, then click
on the [OK] button.
3. To add or edit a Host Group in the IP Host Group area, either click on the [Add New Host Group]
button or highlight a Host Group and click on the [Edit] button.
Note: If you change the name of the Host Group that is being used in the Security policy, then
the updated host group name will also be reflected in the security policy details.
4. In the IP Host Group Details area:
a. To define or modify a Host Group enter the name of the Host Group in the [Name] field.
b. Enter a description or purpose of this Host Group in the [Description] fields.
5. In the Address List area select at least one set of network information.
Select either [IPv4] or [IPv6].
a.
b. From the Address Type drop-down menu, select one of the following:
• Specific - to specify a single IP Address.
• Subnet - to specify a range of IP Addresses.
• All - if all addresses of the IP type are to be included.
156 Xerox ColorQube™ 9201/9202/9203
System Administrator Guide